TV/SC-I

734-0X1000-XXX

DOWNLOAD REQUEST QUOTE
A thermostatic element located at one end of the TV/SC-I (inside the enclosure) regulates the steam supply to the heater to accurately maintain the desired temperature, operating like the thermostat in an oven. Heat radiating from the steam coil heater reaches the actuator causing it to quickly shut of the steam supply when the desired temperature is reached, regardless of outside ambient. The TV/SC-I comes complete with a weather-tight bulkhead fitting for the valve body; optional bulkhead fittings for 3/8 tubing connections are available. Also available is a short configuration for installations with the valve and all connections completely within the enclosure (see TV/SC-A and ITCH product fact sheets). These economical valves are available with set points from 35°F to 200°F (1.7°C to 93.3°C)
The TV/SC-I assures accurate temperature control in an instrument or analyzer enclosure. It’s a reliable, economical alternative to costly, hazardous electric heating. This compact thermostatic control valve senses enclosure temperature and automatically regulates the low of steam to maintain the temperature. In cooling applications the reverse-acting TV/SC-IR can be used to regulate the low of glycol, water, air or other cooling media.
  • Exclusive Thermoloid® thermal actuator
  • Direct acting (No pilot valve)
  • Stainless Steel body, fittings, spring & plug
  • Compact low mass - fast response
  • Corrosion resistant - long service life
  • Ram-type plug for reliable tight shut-off
  • Compatible with standard tubing and connections
  • Maintains enclosure temperature within specified range
  • Self-operating, no power or signal required
  • Eliminates danger of overheating and explosion hazard
  • Long service life
  • Unaffected by pressure variations
  • Quick and easy installation
Series TV/SC-I
Description 1/2" TV/SC-I-S-SS
Size 1/2" NPT
Length-in 10.5
Length-mm 267
Weight lb 1.2
Weight kg 0.6
Cv 0.9
Maximum Operating Pressure 200 PSIG (13.8 BAR)
Maximum Temperature Valve End 388°F (198°C)
Maximum Temperature Sensing End 150°F (66°C) over set-point limit 300ºF(149ºC)
Opening Temperature 35°F, 40°F, 50°F, 55°F, 60°F, 65°F, 75°F, 85°F, 90°F, 95°F, 100°F, 105°F, 110°F, 120°F, 125°F, 130°F, 140°F, 150°F, 155°F, 160°F, 170°F, 180°F, 190°F, 200°F (1.7°C, 4.4°C, 10°C, 12.8°C, 15.6°C, 18.3°C, 23.9°C, 29.4°C, 32.2°C, 35°C, 37.8°C, 40.6°C, 43.3°C, 48.9°C, 51.7°C, 54.4°C, 60°C, 65.6°C, 68.3°C, 71.1°C, 76.7°C, 82.2°C, 87.8°C, 93.3°C)
Closing Temperature Valve will close 10°F above the open temperature
Body Material Stainless Steel
Fittings Parker A-LOK or Swagelok
Isometric View Download
Front View Download
Top View Download
Side View Download

Write a review

Note: HTML is not translated!
    Bad           Good