.png "ThermOmegaTech, Inc."){kind=logo}
Packaged with the ESS is a triple-redundant thermostatic valve explicitly designed for emergency safety shower/face/eyewash applications. The Therm-O-Mix®/WWM is factory mounted and piped to the water heater. After water flow is activated at the emergency station, the outlet water temperature from the ESS will be maintained at 85°F tepid temperature. The ESS can achieve the high-volume demand required for a safety drench system by mixing the 170°F water in the tank with incoming cold water. The mixing valve meets OSHA and ANSI requirements and can provide constant 85°F output regardless of inlet pressure and temperature variations. The temperature is factory set making the valve tamper-proof. The water temperature is not warm enough to open skin pores and not cold enough to deter usage. The valve can provide a full range of flows from 0.4 GPM for an eyewash to the combined 23 GPM flow for a simultaneous demand for a shower, eyewash, and face wash system.
The ESS safety shower water heater packaged with the WWM water/water mixing valve is used for emergency safety shower and face/eyewash stations in manufacturing, food production, chemical, pharmaceutical, petrochemical, and other facilities where personnel can be exposed to hazardous or corrosive materials. At ThermOmegaTech®, we offer a range of tepid water delivery methods to meet any of your needs. From our steam and water mixing Therm-O-Mix® Station, hot and cold water mixing Therm-O-Mix®/WWM valve, or our ESS tepid water heater, your employees will always have access to safe, reliable, and comfortable showers when they need them most.
- Factory packaged with the Therm-O-Mix Station®/WWM
- All electrical operating controls are factory selected and wired to ensure reliable operation
- ½” Hydrastone cement lining provides tank longevity
- Fully insulated with 3″ thick polyurethane foam to minimize standby heat loss
- Copper-silicon alloy tapings cannot rust or corrode
- High impact composite jacket cannot rust or corrode and eliminates potential damage during installation and transit
- Compliant with OSHA and ANSI tepid water standards
- Self-operating mixing valve prohibits the delivery of overheated water to prevent scalding
- Mixing valve designed to ensure a constant flow of tepid water even when an accident causes a loss of electric power
- Reduces risk of Legionella because water is stored at an elevated temperature
- Component’s factory assembled simplifies installation
- 5-year non-pro-rated tank warranty
| Series | ESS Tepid Water Heater |
| Description | ESS WATER HEATER |
| Tepid Water Temperature | 75°F or 85°F |
| Standard Ratings KW | 1.5 |
| Tank | Hydrastone Cement Lined Steel |
| Storage Capacity | 119 Gallons |
| Orientation | Vertical |
| Voltages | 120 thru 600 Volt |
| Phase | 1 or 3 |
| Cold Water Inlet Size | 1 1/2" Female NPT |
| Tepid Water Outlet Size | 1 1/4" Female NPT |
| Drain Size | 3/4" GHT |
| Relief Valve Size | 3/4" Female NPT |
| Relief Valve Type | T&P, 210°F, 150 PSI |
| Thermostat Range | 100-180°F |
| Piping | Copper Tubing |
| Mixing Valve Cv | 10 |
| Pressuer Drop at 20 GPM | 4 PSI |
| Minimum Supply Pressure | 30 PSI |
| Hi-Limit | 190°F |
| Design WP | 150 PSI |
| Design TP | 300 PSI |
| Elements | Copper Sheathed |
| Insulation | 3" Polyurethane Foam |
| Tank Warranty Standard Optional | 5 Year Non Pro-Rated 10 Year Non Pro-Rated |
| Electrical Warranty | 1 year |
| Jacket | High Impact Colorized Composite |
| Color | Brown and Tan |
| Isometric View | Download |
| Front View | Download |
| Top View | Download |
| Side View | Download |