HAT/RA-LP

144-302X02-XXX

DOWNLOAD REQUEST QUOTE
The HAT/RA-LP (reverse-acting heat actuated trap valve with leak port) is a cooling water control valve designed to automatically and continuously maintain a constant temperature in liquid cooling systems. Since it is what we classify as reverse-acting, the valve will open on rising temperatures. At start-up, the valve is closed except for its “control leakage”, which allows a small amount of flow through the valve so that the temperature control actuator can sense the changing fluid temperature upstream in the system. As the fluid temperature increases to within the operating range of the HAT/RA-LP, the thermal actuator modulates the valve open. If the fluid temperature is above the valve’s set point, the valve will continue to modulate open allowing additional fluid discharge. As the outlet temperature falls, the cooling water control valve then modulates toward the closed position, reducing flow. This modulating action maintains a relatively constant fluid temperature even as operating conditions vary.
HAT/RA-LP valves are ideal for maintaining cooling temperatures in water-cooled compressors,die-casting equipment, engines, water-cooled heat exchangers, welding equipment, electrical equipment, and molding equipment.
  • Exclusive self-actuating Thermoloid® blend paraffin wax actuator
  • Corrosion-resistant – long service life
  • Compact low mass – fast response
  • Operates in narrow temperature band
  • Stainless steel body, fittings, spring and plug
  • Ram-type plug for reliable shut-off
  • Leak port (LP) senses changing upstream temperature
  • Self-operating – no external power source required
  • Maintains constant discharge temperatures
  • Improves system efficiency
  • Unaffected by pressure variations
  • Conserves water
  • Easy installation
Series HAT/RA-LP
Description 1/2" HAT/RA-LP C-Port 1/4 GPM
Size 1/2" NPT
Diameter-in 1.3
Diameter-mm 33
Length-in 4.5
Length-mm 114
Weight lb 0.9
Weight kg 0.4
Cv 1.5
Maximum Operating Pressure 150 PSIG (10.3 BAR)
Maximum Temperature 150°F(66°C) over set-point-limit 300ºF(149ºC)
Port Size C
Opening Temperature 40°F, 45°F, 50°F, 60°F, 70°F, 75°F, 85°F, 95°F, 100°F, 105°F, 110°F, 115°F, 120°F, 125°F, 130°F, 140°F, 150°F, 160°F, 170°F, 175°F, 180°F, 190°F, 200°F, 210°F (4.4°C, 7.2°C, 10°C, 15.6°C, 21.1°C, 23.9°C, 29.4°C, 35°C, 37.8°C, 40.6°C, 43.3°C, 46.1°C, 48.9°C, 51.7°C, 54.4°C, 60°C, 65.6°C, 71.1°C, 76.7°C, 79.4°C, 82.2°C, 87.8°C, 93.3°C, 98.9°C)
Closing Temperature Valve will close 10°F below the open temperature
Body Material Stainless Steel
Seal Material EPDM or Viton Seals
Isometric View Download
Front View Download
Top View Download
Side View Download

Write a review

Note: HTML is not translated!
    Bad           Good