.png "ThermOmegaTech, Inc."){kind=logo}
When the shower or eyewash is activated, the pressure drop on a diaphragm opens the steam control valve (V-3). Water and steam flow are established instantly heating water and condensing the steam. After exiting the heat exchanger, hot water enters the tempering valve (V-5) and then the mixing valve (V-1) where it is blended with cold water to produce an outlet of 80°F water. Steam valve remains closed should water supply be interrupted.
- Plant steam and water never mix-uses compact heat exchanger
- Standard pressure unit available for 45-60 PSIG steam pressure
- Low pressure unit available for 15-30 PSIG steam pressure
- Durable enclosure can be readily removed for service
- Conforms to OSHA and ANSI recommendations
- Designed to meet ASSE 1071 requirements
| Series | Therm-O-Mix Tepid Water Delivery System |
| Description | THERM-O-MIX® STATION BPHE (45-60 PSIG STEAM) |
| Outlet Flow Rate Max | 25 GPM-95 LPM |
| Outlet Flow Rate Min | 3 GPM-11 LPM |
| Ambient Operating Temperature Max | 120°F-49°C |
| Ambient Operating Temperature Min | -30°F-34°C |
| Inlet Water Pressure Max | 90 PSIG-6 BAR |
| Inlet Water Pressure Min | 55 PSIG-4 BAR |
| Inlet Water Temperature Max | 80°F-27°C |
| Inlet Water Temperature Min | 40°F-4°C |
| Inlet Saturated Steam Pressure Max | 60 PSIG-4 BAR |
| Inlet Saturated Steam Pressure Min | 45 PSIG-3 BAR |
| Inlet Saturated Steam Pressure Low Pressure Max | 30 PSIG-2 BAR |
| Inlet Saturated Steam Pressure Low Pressure Min | 15 PSIG-1 BAR |
| Maximum Steam Temperature Max | 350°F-177°C |
| Cold Water Bypass Flow Rate | 24 GPM @ 25 PSI Pressure Drop |
| Water Inlet & Outlet Pipe Size | 1 1/4" NPT (F) |
| Steam Supply & Drain Pipe Size | 1" NPT (F) |
| Steam Consumption | 600 lb./hr @ 25 GPM Flow Rate, 20 lb./hr @ Idle |
| Condensate Discharge Rate | 12 GPH maximum |
| Pressure Drop Water Inlet | 25 PSI @ 25 GPM |
| Isometric View | Download |
| Front View | Download |
| Top View | Download |
| Side View | Download |
